Heavy Duty & Extreme
LN-903 Heavy Duty Adhesive, Tan, 12 Pack
12 x 10 oz cartridges
$42.12
★★★★☆ 4.5 out of 5 · 532 ratings
Twelve tan LN-903 cartridges for the crew that keeps a case under the seat. Heavy Duty is our multi-purpose, low-solvent, high-strength construction adhesive, GREENGUARD Gold certified, with a permanent bond on plywood, OSB, drywall, tile board, foam board and treated lumber and a 3/8 in. gap-bridging bead.
BondsPlywood, OSB, particleboard, drywall, tile board, foam board, treated lumber, brick veneer (interior), concrete, wood and most common building materials, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Interior & exterior
Fills 3/8 in. gaps
Holds heavy materials
GREENGUARD Gold
- Twelve 10 oz LN-903 cartridges
- Low-solvent, high-strength, multi-purpose formula
- Certified GREENGUARD Gold by UL Environment
- Bridges gaps up to 3/8 in., impact resistant
- Interior and exterior
Reaches for it
Framing crewsRemodeling contractorsFacilities teamsSerious DIY stockpiles
- Surfaces clean, dry and above 40 degrees F; wipe off sawdust and loose paint.
- Cut the nozzle at 45 degrees for a 1/4 in. bead, puncture the seal, load the gun.
- Run a zigzag bead on one surface, 2 to 3 in. apart, or a continuous bead on trim and framing.
- Press the pieces together within 10 minutes and slide slightly to seat the bead.
- Brace or fasten for 24 hours. Full cure up to 7 days; longer in cold or between non-porous materials.
Not recommended for flooring, ceramics, mirrors, granite, marble, plastic, vinyl, underlayment or installing tile board directly to studs.
| Size | 10 oz cartridge, 12 pack |
|---|---|
| Color | Tan |
| Coverage | About 31 ft per cartridge |
| Working time | About 10 minutes |
| Base | Low-solvent synthetic rubber, high strength |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior, waterproof after cure |
| Certification | GREENGUARD Gold (UL Environment), low VOC |
A case of the classic tan bead. Orders, delivery and returns run through the order page of the partner store.
Questions about this tube
Is this listing different from the 120 fl oz case?
Same LN-903 cartridges and count; two listings from different sellers, so compare the price the day you buy.
How should a case be stored?
Cool and dry, 40 to 100 degrees F, cartridges upright, for up to a year.
Same shelf
See the lineRecommended products
Heavy Duty & Extreme
LN-901 Heavy Duty Construction Adhesive, 28 oz
28 oz cartridge
$6.48★★★★☆ 4.2 (158)
Heavy Duty & Extreme
Extreme Heavy Duty Construction Adhesive, 10 oz
10 oz cartridge
$4.48★★★★☆ 4.5 (4,762)
$42.12