Heavy Duty & Extreme
LN-903 Heavy Duty Adhesive, Tan, 2 Pack
2 x 10 oz cartridges
$15.25
A pair of LN-903 cartridges for the multi-purpose, low-solvent, high-strength bond that pros specify by number. Certified by UL Environment to the GREENGUARD Gold standard as a low-emitting material, recommended for plywood, particleboard, brick veneer (interior), foam board, wafer board and most heavy duty applications.
BondsPlywood, OSB, particleboard, drywall, tile board, foam board, treated lumber, brick veneer (interior), concrete, wood and most common building materials, interior and exterior.
Price and stock are shown on the partner store page that opens from the button.
Interior & exterior
Fills 3/8 in. gaps
Holds heavy materials
GREENGUARD Gold
- Two LN-903 10 oz cartridges, tan
- Multi-purpose, low-solvent, high-strength construction adhesive
- GREENGUARD Gold certified low-emitting material
- Interior and exterior heavy duty applications
- Not for flooring, ceramics, mirrors, granite, marble, plastic or vinyl
Reaches for it
Interior brick veneerFoam board insulationWafer board and particleboardGeneral remodeling
- Surfaces clean, dry and above 40 degrees F; wipe off sawdust and loose paint.
- Cut the nozzle at 45 degrees for a 1/4 in. bead, puncture the seal, load the gun.
- Run a zigzag bead on one surface, 2 to 3 in. apart, or a continuous bead on trim and framing.
- Press the pieces together within 10 minutes and slide slightly to seat the bead.
- Brace or fasten for 24 hours. Full cure up to 7 days; longer in cold or between non-porous materials.
Not recommended for flooring, ceramics, mirrors, granite, marble, plastic, vinyl, underlayment or installing tile board directly to studs.
| Size | 10 oz cartridge, 2 pack |
|---|---|
| Color | Tan |
| Coverage | About 31 ft per cartridge |
| Working time | About 10 minutes |
| Base | Low-solvent synthetic rubber, high strength |
| Working time | About 10 minutes |
| Gap fill | Up to 3/8 in. |
| Application temperature | 40 to 100 degrees F |
| Service | Interior and exterior, waterproof after cure |
| Certification | GREENGUARD Gold (UL Environment), low VOC |
Two cartridges, one part number, no guessing in the aisle. Orders, delivery and returns run through the order page of the partner store.
Questions about this tube
Is LN-903 safe for foam board?
Yes, foam board is on the recommended list; the low-solvent formula will not attack rigid insulation.
What does GREENGUARD Gold mean on a cartridge?
UL Environment tested the cured adhesive for chemical emissions and certified it as low emitting, suitable for schools and homes.
Same shelf
See the lineRecommended products
Heavy Duty & Extreme
LN-901 Heavy Duty Construction Adhesive, 28 oz
28 oz cartridge
$6.48★★★★☆ 4.2 (158)
Heavy Duty & Extreme
Extreme Heavy Duty Construction Adhesive, 10 oz
10 oz cartridge
$4.48★★★★☆ 4.5 (4,762)
$15.25