Grabs fast and stays put.
This works really well for quick grabbing and holding panels very snug. I had to remove a panel because of a silly mistake I made, and it took me quite a bit of work to get it off.






10 oz cartridge
★★★★☆ 4.5 out of 5 · 41 ratings
The trim carpenter's cartridge. Paneling & Molding grabs instantly and gives about 20 minutes of working time, so a run of base or crown lands exactly where it was placed and stays there with fewer nails to fill. Safe for foam board and polystyrene, low odor, low VOC, and it bonds wood, drywall, hardboard, particleboard and treated lumber.
Price and stock are shown on the partner store page that opens from the button.
Interior use only. With plastic trim the second surface must be porous.
| Size | 10 oz cartridge |
|---|---|
| Color | Off-white / tan |
| Base | Latex, fast grab |
| Working time | About 20 minutes |
| Base | Latex, fast grab, low VOC |
| Working time | About 20 minutes |
| Service | Interior |
| Cleanup | Water while wet |
| Certification | Contributes to LEED credits |
This works really well for quick grabbing and holding panels very snug. I had to remove a panel because of a silly mistake I made, and it took me quite a bit of work to get it off.
A few finish nails every few feet hold the piece while the adhesive sets; the adhesive does the holding afterward.
Yes, as long as the other surface is porous (wood or drywall).
10 oz cartridge
2 x 10 oz cartridges
28 oz cartridge
24 x 10 oz cartridges